BBY 55-03W E6327

BBY55... Silicon Tuning Diodes • Excellent linearity • High Q hyperabrupt tuning diode • Low series resistance • Designed for low tuning voltage operation for VCO's in mobile communications equipment • Very low capacitance spread • Pb-free (RoHS compliant) package BBY55-02V BBY55-02W BBY55-03W  Type BBY55-02V BBY55-02W BBY55-03W Package SC79 SCD80 SOD323 Configuration single single single LS(nH) 0.6 0.6 1.8 Marking 7 77 white 7 Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 16 V Forward current IF 20 mA Operating temperature range Top -55 ... 150 °C Storage temperature Tstg -55 ... 150 1 Value Unit 2011-06-15 BBY55... Electrical Characteristics at T A = 25°C, unless otherwise specified Symbol Parameter Values min. typ. Unit max. DC Characteristics Reverse current IR nA VR = 15 V - - 3 VR = 15 V, TA = 85 °C - - 100 AC Characteristics Diode capacitance pF CT VR = 1 V, f = 1 MHz 17.5 18.6 19.6 VR = 2 V, f = 1 MHz 14 15 16 VR = 3 V, f = 1 MHz 11.6 12.6 13.6 VR = 4 V, f = 1 MHz 10 11 12 VR = 10 V, f = 1 MHz 5.5 6 6.5 CT2/C T10 2 2.5 3 rS - 0.15 0.4 Capacitance ratio VR = 2 V, VR = 10 V, f = 1 MHz Series resistance Ω VR = 5 V, f = 470 MHz 2 2011-06-15 BBY55... Diode capacitance CT = ƒ (VR) Capacitance change ∆C = ƒ(TA) f = 1MHz f = 1 MHz 4 30 pF % 1V 2V 24 2 20 ∆C CT 22 18 6V 10V 1 16 0 14 12 -1 10 8 -2 6 4 -3 ∆C=(C(TA)-C(25°C))/C(25°C) 2 0 0 2 4 6 8 10 V -4 -50 14 -30 -10 10 30 50 70 VR °C 110 TA Series resistance rS= ƒ(VR) Reverse current IR = ƒ(VR ) TA = Parameter f = 470 MHz 10 -9 0.5 A Ohm 80°C IR rs 10 -10 0.3 60°C 25°C 0.2 10 -11 0.1 0 0 2 4 6 8 10 V 10 -12 0 14 VR 2 4 6 8 10 12 14 V 18 VR 3 2011-06-15 Package SC79 4 BBY55... 2011-06-15 Package SCD80 BBY55... Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 ±0.1 0.2 ±0.05 10˚MAX. 1.7 ±0.1 1 0.3 ±0.05 Cathode marking 7˚ ±1.5˚ 1.3 ±0.1 A 2 0.7 ±0.1 0.35 1.45 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Reel with 2 mm Pitch 2 0.2 2.5 8 1.45 Standard 4 Cathode marking 0.4 0.9 Cathode marking 5 0.7 2011-06-15 BBY55... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 6 2011-06-15 Package SOD323 7 BBY55... 2011-06-15 BBY55... Edition 2009-11-16 Published by Infineon Technologies AG 81726 Munich, Germany  2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 8 2011-06-15